07.11.2011 RLT1064-150SBG 1 of 1 RLT1064-150SBG technical data single-mode 14-pin butterfly laser diode features ? lasing mode structure: single mode ? peak wavelength : typ. 1064 nm ? optical ouput power: 150 mw ? package: 14-pin butterfly, thermistor, tec ? polarization: te specifications (t c =25c) item symbol min. typ. max. unit optical specification wavelenght p 1063.5 1064 1064.5 nm spectrum fwhm ? - 0.3 0.5 nm operating power p o - 150 - mw kink-free power p k 200 mw electrical specification operating current i o - 400 500 ma threshold i th - 50 100 ma operating voltage v o - 2.1 2.5 v slope efficiency p/ i 0.40 0.50 - w/a tec voltage - - 3.2 v tec current - - 2.0 a general specification lifetime 100.000 hours storage temperature -40 - 80 c operating temperature 0 25 70 c lead soldering temp. (5 sec) - - 250 c the above specifications are fo r reference purpose only and subject ed to change without prior notice.
07.11.2011 RLT1064-150SBG 2 of 2 package
07.11.2011 RLT1064-150SBG 3 of 3 safety of laser light ? laser light can damage the human eyes and skin. do not expose the eye or skin directly to any laser light and/or through optical lens. when handling the lds, wear appropriate safety glasses to prevent laser light, even any reflections from entering to the eye. focused laser beam through optical instruments will increase the chance of eye hazard. ? warning: laserdiode is emitting invisible light cautions 1. operating methode ? this ld shall change its forward voltage requirement and optical ouput power according to temperature change. also, the ld will require more operation current to maintain same ouput power as it degrades. ? confirm that electrical spike current generated by switching on and off does not exceed the maximum operating current level specified her ein above as absolute maximum rating. also, employ appropriat countermeasures to reduce c hattering and/or overshooting in the circuit. 2. static electricity ? static electricity or electrical surges will reduce and degrade the reliability of the lds. it is recommended to use a wrist trap or anti-electrostatic glove when handeling the product. 3. absolute maximum rating ? active layer of lds shall have high current density and generate high electric field during its operation. in order to prevent excessive dam age, the ld must be operated striclty below absolute maximum rating.
|
